.jpg)
.png)
25Kg Cement Tile Adhesive Ceramic Tile/ Stone Adhesive Floor Wall Thin Set Mortar/simen gam for Buil
| Sebelumnya | 8 / 12 | Seterusnya |
SIkaCeram-88 is cementitious tile adhesive, supplied ready to use with the addition of water, for bonding ceramic tiles, porcelain tiles and mosaics of every type of floors, walls. SikaCeram -88, a in continuous thin layers, up to 10mm thick. Due to excellent adhesion, it can be used in situation where traditional tile adhesives for bonding tiles are not suitable due to the type of tile, the substrate or the specific job situation or location.
Advantages
- Easy to use with excellent workability and thixotropic consistency.
- Very good adhesion to most common substrates (concrete, cementitious mortar, stone, bricks, etc.).
- Can be used with Sika latex SP to increase performance of the adhesive.
- Product Data Sheet (PDS).
SikaCeram-88 is suitable to bond the following types of tile:
- Ceramic, porcelein, homogeneous tiles.
- All type of low and high absorption tiles.
SikaCeram -88 can be used on substrates including:
- Concrete and mortar.
- Bricks.
- Tiled Surfaces (walls and floors).
Consumption
- 1.5 kg/m² per mm thickness.
Product Data
| Appearance / Colours | Grey powder |
| Storage Conditions | 6 months from date of production if stored properly in dry conditions, in undamaged and unopened, original sealed packaging. Not sensitive to frost |
| Chemical Base | Cementitious mortar |
| Density | Fresh mortar density: ~ 1.79 kg/l (at +25°C) |
| Grading | Dmax: 0.4 mm |
| Layer Thickness | 3 mm min. / 10 mm max |
Disclaimer
All product images shown are for illustration purposes only. Actual products may varies in term of size, type, brand, version, colour, and other relevant characteristics.
